LineStil Edge
ALKYD BASED COLUMN AND KERB PAINT
LineStil Edge is a single-component, alkyd resin based kerb paint used in border applications to increase traffic and pedestrian safety, on walls and columns of tunnels and car parks for routing and numbering purposes. Any color can be produced.
LineStil Aqua
WATER BASED ROAD MARKING PAINT

LineStil Aqua can be used in all types of roads, runways, parking lots and special projects. LineStil Aqua one component of water-based road marking paint with high reflection power through sprayed glass beads on the surface via spraying guns. Water-based paint is eco-friendly and no harm to human health. Any desired color can be produced.

LineStil Alkyd
ALKYD RESIN SOLVENT BASED ROAD MARKING PAINT
LineStil Alkyd is a solvent-based road marking paint containing alkyd resin. LineStil Alkyd one component of solvent-based road marking paint with high reflection power through sprayed glass beads on the surface via spraying guns. It can be used in all types of roads, runways, parking lots and special projects. Any desired color can be produced.

LineStil Acrylic
ACRYLIC RESIN AND SOLVENT BASED ROAD MARKING PAINT
LineStil Acrylic is a solvent-based road marking paint containing acrylic resin. It is one component of solvent-based road marking paint with high reflection power through sprayed glass beads on the surface via spraying guns. It can be used in all types of roads, runways, parking lots and special projects. Any desired color can be produced.The drying process is carried out by the evaporation of solvent inside in the paint.

ColdStil Screed
SCREED TWO COMPONENT ROAD MARKING PAINT
ColdStil Screed is a solvent-free, methyl methacrylate-based two-component road marking paint with a high UV, physical and chemical resistance. It is used for safety and warning signs on the roads, drawing pedestrian crossings and deceleration lines, drawing shapes with patterns on the road and writing letters. ColdStil Screed is a solvent-free, methyl methacrylate based two-component road marking paint with a high UV, physical and chemical resistance that is specially formulated to be applied by screed method. The reaction hardens to form a film on the applied surface when the components are mixed at a certain ratio. Thanks to its high strength, it protects its reflection power, color, and film thickness for a long time under high traffic. Durability varies between 24 and 48 months, depending on traffic intensity and the road construction. The paint should be applied on the surface within 7 minutes after the paint is mixed with hardener.

ColdStil Perfusion
PERFUSION TWO COMPONENT ROAD MARKING PAINT
ColdStil Perfusion is a solvent-free, methyl methacrylate-based two-component road marking paint with a high UV, physical and chemical resistance that is specially formulated to be applied by perfusion method. The reaction hardens to form a film on the applied surface when the components are mixed at a certain ratio. The reflectivity power of glass beads dropping on hundreds of particles produced by the perfusion method is much stronger than the smooth surfaces. In addition, in rainy weather, the resulting gaps in the perfusion method create a canal for rainwater so that the visual distances of drivers in rainy weather do not decrease. Thanks to its high strength, it protects its reflection power, color, and film thickness for a long time under high traffic. Durability varies between 24 and 48 months, depending on traffic intensity and road construction.
It is used for safety and warning signs on the roads, drawing pedestrian crossings and deceleration lines, drawing shapes with patterns on the road, and writing letters.

ColdStil Profiled
PROFİLED TWO COMPONENT ROAD MARKING PAINT

ColdStil Profiled is a solvent-free, methyl methacrylate-based two-component road marking paint with a high UV, physical and chemical resistance that is specially formulated to be applied by the profiled method. The reaction hardens to form a film on the applied surface When the components are mixed at a certain ratio. Thanks to its high strength, it protects the reflection power, color, and film thickness for a long time under high traffic. Durability varies between 24 and 48 months, depending on traffic intensity and road construction.
The sequential and regular thicknesses formed as a result of the application warn the driver that s/he is out of the lane while driving on the surface and speeds up the driver to return to the lane that the driver should be.
The paint must be applied on the surface within 7 minutes after the paint is mixed with hardener.

ColdStil Triple
THREE COMPONENT ROAD MARKING PAINT
ColdStil Triple is a solvent-free, methyl methacrylate-based three-component road marking paint with a high UV, physical and chemical resistance. Component C (hardener, %2) is mixed homogeneously with component A at a certain ratio. The mixture of A + C and B is applied to the surface by mixing in the air before contact with the surface through appropriate application equipment and the resulting reaction hardens to form a film on the applied surface. Thanks to its high strength, it protects the reflection power, its color, and film thickness for a long time under high traffic. Durability varies between 24 and 48 months, depending on traffic intensity and road construction.

LineStil Tri-Cycle
ACRYLIC BICYCLE WAY PAINT
LineStil Tri-Cycle is three-component bicycle way paint that has high adhesion, mechanical strength, UV, and chemical resistance. Thanks to its high strength, maintains its reflection power, color, and film thickness for a long time under heavy traffic. Component A previously mixed with Component C (Hardener) is mixed with Component B so that drying occurs by the reaction of the components that are combined in the air. 25 kg A, B, and C (hardener) Components are offered as a set for sale.
ThermoStil Screed
SCREED THERMOPLASTIC ROAD MARKING PAINT

ThermoStil Screed is a solvent-free thermoplastic road marking paint with high UV, physical and chemical resistance. ThermoStil Screed formulated to be applied on the road surface by means of suitable devices for the screed method after melted at 180-220 °C degrees. It provides a short 4-minutes drying time application advantage without causing traffic interruption. With the VOC-free formulation, it does not harm the environment. Although this technique is used as lane practice in many countries, it is widely used in pedestrian crossings in our country.
ThermoStil Spray
SPRAY THERMOPLASTIC ROAD MARKING PAINT

ThermoStil Screed is a solvent-free thermoplastic road marking paint with high UV, physical and chemical resistance. ThermoStil Screed formulated to be applied on the road surface by means of suitable devices for the screed method after melted at 180-220 °C degrees. It provides a short 4-minutes drying time application advantage without causing traffic interruption. With the VOC-free formulation, it does not harm the environment. The paint is designed to be used on divided roads and highways and also to be able to use on main arterial roads in the city.

ThermoStil Extrude
EXTRUDED THERMOPLASTIC ROAD MARKING PAINT
ThermoStil Screed is a solvent-free thermoplastic road marking paint with high UV, physical and chemical resistance. ThermoStil Screed formulated to be applied on the road surface by means of suitable devices for extrude method after malted at 180-220 °C degrees. After 2 mm screed application, another 4 mm extrude application performed as a top layer then dries within 7 minutes. With VOC-free formulation, it is environmentally friendly. ThermoStil Extrude has high wet visibility a convenient starting and drives warning feature for high branding line applications with its high wet visibility.
GLASS BEADS
Colorless, spherical glass particles which are obtained as a result of being processed at high temperatures, are sprayed onto the wet paint film during the application and are added into the paint recipe during the production in order to provide the night visibility of road markings. It reflects a light beam coming from a vehicle’s headlight, back to the driver.

StilGrass
GRASS FIELD PAINT
Our StilGrass brand natural resin and water-based paint are used to line all kinds of grass-covered areas and to paint in the green of yellowed grass. Due to its natural resin and water-based nature, it does not harm plant tissue.

StilCourt
TENNIS COURT
Our StilCourt brand paint has two different options acrylic resin and water or solvent-based court paint. It can be used to coat, mark and line all kinds of tennis courts.

Stilent
THINNER
Stil Trafik paints are always ready to use without making the thinning. The product is manufactured to provide services to our customers’ different paint types in the market. If it is used as a cleaning thinner, it will not give an effective result.
Stilex
CLEANING THINNER (CELLULOSIC THINNER)
Stilex thinner is designed to meet the requirements for cellulosic thinner which has high dissolving property to use at the cleaning of road marking machines/equipment after road marking applications. Therefore, it will be healthier and more effective to use only for cleaning since it will cause negative results at the performance of the paint when it is used as a thinner in the paint.

Effective results can often be achieved through the utilisation of a combination of removal techniques.

Issues to consider when selecting a removal technique are as follows;

– Quantity of Road Markings to be removed?

– Is the surface a temporary or permanent surface?

– Do you require full or partial removal of the road marking?

– What space is available for equipment access?

– Time of day/night when the work will be carried out?

– Proximity of houses to the work site?

– Do you require a temporary or permanent removal solution?

We currently provide 2 Road Marking removal techniques:  

1. Mechanical Scabbling

2. UHP Water Jetting

1-)MECHANICAL SCABBLING

2-)UHP WATER JETTING

We are producing all kinds of road marking trucks in order to meet the requirements of traffic sector. The capacity of the road marking truck can be modified to desired capacity. Also any desired accessory can be added according to the customer’s preference.

• Airless Road Marking Trucks

• Air-Spray Road Marking Trucks

• Thermoplastic Road Marking Trucks

Preparation of Air-Spray Road Marking Truck (on the left) and Thermoplastic Road Marking Truck (on the right)

Production of Airless Road Marking Truck

Although they appear to be static, bridges, expansion points that may occur in the connection point and the expansion problems to eliminate the expansion gap is required to eliminate. from this gap, expansion joints are placed so that traffic can flow freely. In our company, the mobility of the joints is 0-70 mm horizontally, ± 1 mm in the vertical, the temperature range is between -30 and +50 degrees and it is applied to the depth of 175 mm. Our company has an annual expansion rate of 2000 m with Elastic Type (bitumen based) expansion joints in bridges with 40-70 mm expansion range.

The application which can be done under traffic is realized by our expert team with easy, fast and keeping the traffic safety on the front panel. Since the difference in elevation does not occur on the asphalt surface after application, very good driving comfort is ensured.