MMA PAINT

MMA (Methyl Methcrylate) Cold Plastic is a two component road marking paint. It is an extremely durable product used at high stress traffic location such as roundabouts, junctions and heavily trafficked roads. The product is currently available as a screed applied system. The technology used to develop MMA Cold Plastic has been successfully used throughout Northern Europe for many years in hot and cold climates.

While the initial cost is higher than conventional thermoplastic materials, MMA Cold Plastic will have an increased service life when used at high stress locations.

APPLICATION

MMA Cold Plastic may be applied over existing thermoplastic markings provided that they are well worn and the surface is in sound condition. MMA Cold Plastic is ideal for areas where high stress and extreme wear is expected – busy junctions, yellow boxes and stop/yield locations. It is also suitable to increase safety in areas such as pedestrian crossings. Surface applied glass beads should be used where required. Application rates vary depending upon the grade of glass bead used.

MMA Cold Plastic is designed for hand screed application only, using a drag box.

Recommended thickness is 1.0 – 3.0 mm.

FEATURES

  • Durable and long lasting
  • Excellent glass bead retention properties
  • Performs exceptionally well at high stress locations
  • Suitable for use on bituminous, concrete and paved surfaces
  • Cures at temperatures as low as10oC.

Compliance with IS EN 1436 & IS EN 1871

TYPICAL USES

  • Junction with high traffic volumes
  • On concrete / brick paving surfaces
  • Mini roundabouts
  • Pedestrian Crossings
  • Zebra Crossings